Product-Mist Diffuser 100ml


Capacity: Approx.100ml

Features two mist modes:

  1. Continuous mist (lasts approx. 4-6 hours)
  2. Intermittent mist (lasts approx. 6-8 hours)

Colour Changing Lights:

  1. Rotate through all colours or select the colour of your choice

Auto shut off when water runs out

Dimensions: 8.5cm W x 8.5cm D X 16cm H

Essential Oils & Fragrance Oils sold separately.


Directions for use:

Step 1. Add water to the inner vessel until the fill line.

Step 2. Add up to 5 drops of essential oil or fragrance oil depending on your preference.

Step 3. Place lid on inner vessel and slide ceramic sleeve over the top.

Step 4. Turn diffuser on and enjoy the ambiance immediately.

Step 5. Follow Quick Clean instructions after every use.


Over time, your diffuser will develop an oil build-up that potentially can prevent it from working properly, so it is important to understand how to use and take care of it.

Here are a few tips that will help you have the best aromatic experience and extend the life of your Stevie Buoy Ultrasonic Diffuser.


This should be done after every use.

•Empty any excess oil and water left in the diffuser – After unplugging the device from the power supply, empty any essential oil left in the device. Make sure you pour away from any operating buttons found on the diffuser.

•Wipe the inside of diffuser – Using a tiny amount of detergent, wipe the inside with a small cloth or sponge. Remove any build-up in a gentle manner.

•Wipe the outside of the diffuser – Complete step 2 on the outside of the diffuser.

•Rinse and dry – Give the diffuser and water tank a rinse and leave to dry.

•Clean the ultrasonic mist chip - Use a Q-tip dipped in rubbing alcohol to wipe the ultrasonic mist chip found inside the water tank.


This should be done once every 1-2 months.

  1. Empty any excess oil and water left in the diffuser – After unplugging the device from the power supply, empty any essential oil left in the device.Make sure you pour away from any operating buttons found on the diffuser.
  2. Fill the diffuser with water– Fill the water tank with water halfway.
  3. Add 10 drop of vinegar – Add pure white vinegar to the tank.
  4. Run the diffuser – Turn the diffuser on and run for 5 minutes to allow the vinegar mixture to run through the device. This will help remove any oil build up.
  5. Empty the diffuser – Removing the water and vinegar.
  6. Clean tight spots – Dab a cotton tip in white vinegar and clean the tight spots and nooks of the diffuser.
  7. Rinse the diffuser – Use clean water to rinse the diffuser.
  8. Use a dry cloth to thoroughly wipe the diffuser.
  1. When using electrical appliances, safety precautions must always be taken to reduce the risk of fire, electrical shock and personal injury.
  2. Keep out of reach of children and pets and any objects, which are flammable or can catch fire.
  3. Do not use appliance for other than its intended purpose.
  4. For household/ indoor use only.
  5. Do not leave appliance unattended while in use. Unplug the appliance when not in use.
  6. Always keep and use in a safe and secure place.
  7. Do not use in wet areas, near a sink or bathtub.
  8. Never immerse the appliance or cord into water.
  9. If the power supply cord becomes damaged the appliance should be discarded.
  10. The power supply cord cannot be replaced.
  11. Do not over fill the water Tank.
  12. Clean regularly taking care to follow the correct cleaning instructions. Failure to follow these instructions can potentially prevent your diffuser from working properly or damage the unit.

*It’s essential that you do not leave the unit sitting with water/oil inside. As soon as your unit has finished follow quick-rinse instructions to prevent damage. A regular deep clean cycle is essential.*


To get the most out of your Stevie Buoy product CLICK HERE

Please read thoroughly before using any Stevie Buoy products.

You can download a free copy of the Ultrasonic Diffuser Care & Tips HERE

*Please note, product photo may differ from actual item in terms of colour due to lighting, Manufacturing details like hand painted designs or varied finishes which give each piece a one-of-a-kind look.